A type of thermostat known as Saftty’s thermal protector uses bimetal as its temperature-sensing element. The thermal protector’s contact is in a normally open or normally closed-free condition while the electrical device is operating normally. This article will explain the relevant information of Saftty’s thermal protector, so that you can better choose the appropriate thermal protector.
What you should know about the information?
The bimetal sheet will react quickly due to the internal stress produced by the heat to effectively disconnect or connect the circuit when the electrical appliance has been operating for an excessively long time or has an abnormality that causes the temperature to rise to the operating temperature set by the protector. To some extent, this affects temperature control.
The contacts of the thermal protector will automatically shut or open and resume normal operation when the electrical appliance cools down and returns to the set-reset temperature.
Saftty’s thermal protectors are a common component of air conditioners, electric heaters, motors, and other electronic equipment.
Two Types of Saftty’s Thermal Protector
When it comes to thermal protection, nothing is more essential than a thermal protector. Saftty’s thermal protectors use a number of strategies to prevent overheating of user equipment and protect against self-damaging equipment. At Saftty, thermal protection is available in a huge selection of fashions.
The ST06 series thermal protector has a strong seal and is small and delicate. The protector operates between a maximum operating voltage of 500VAC and a temperature range of 60 to 250 degrees. The ST06 series has a diameter and height of 10mm and 6.7mm, respectively.
The ST07 series thermal protector offers extended product life, waterproof and anti-vacuum paint design, automatic equipment complete temperature inspection, and compatibility with fractional horsepower motors, transformers, battery packs, and other equipment.
Conclusion
The ST06 and ST07 series thermal protectors, for example, are available from Saftty if you need them. Get your equipment some thermal protection. About 15 years of research and development (R&D) and manufacture have been devoted to the creation of thermal protectors by Saftty, a 2008 startup. To stop overheating equipment, Saftty’s solutions are used in battery packs, motors, water pumps, fans, and other electric heating appliances.
